News dynamics

Company News

Industry News

6C Fast Charge Lithium Battery to Nature:10 Minutes High Speed Charge, Mohe Not Afraid of Cold Winter

6C Fast Charge Lithium Battery to Nature:10 Minutes High Speed Charge, Mohe Not Afraid of Cold Winter

Lithium-ion battery new breakthrough is coming! The liquid lithium battery with new electrolyte can be charged and discharged within 10 minutes, and the ionic conductivity is increased by 4 times at room temperature. At the same time, it also has an ultra-wide working temperature range, from -70 ℃ to 60 ℃, even in Mohe weather, it can work stably. The new research results from Zhejiang University, the paper has been published in Nature.

28

2024

/

03

Lithium News

Lithium News

In recent years, "Urban Green Space System Planning", "Landscaping Project Specifications" and other guiding documents have been issued and implemented, all emphasizing that the scientific implementation of landscaping projects requires technology and environmental protection. In the bidding of greening projects, it is found that the use of energy-saving machinery and equipment, environmental protection agents and logistics equipment has a significant proportion in the "technical score. Low carbon environmental protection, light has become the development direction of garden machinery products. Application of garden tools

07

2024

/

03

What do you know about the advantages of truss manipulator?

What do you know about the advantages of truss manipulator?

Truss manipulator can cope with high labor loss rate, shortened delivery cycle, safety problems and other aspects of the challenge, the simplicity of the truss manipulator, so that people can participate in the monitoring of the production process, the unmanned is gradually replaced, which is actually more suitable for local enterprises of the existing production management mode is more grounded gas realistic and feasible. Truss manipulator has high precision, fast speed and can work 24 hours a day. The equipment is basically no problem after five or six years of use. The following is a little maintenance cost. One thousand yuan a year is enough. Usually one person is only required to take care of the equipment. Labor has been halved and work injuries have been reduced. In the past, employees had to use both hands and feet to run back and forth around the machine when they went to work. Now employees only need to stand at one end of the production line to operate the whole production line. Now the work is not only easier, but also safer. They are not afraid of employees' worries such as asking for leave. Truss manipulator is a fool's operation, in addition to the truss manipulator research and development engineers, on the truss manipulator operator, is relatively simple. According to the current worker standard, the monthly salary of a worker is 4000 yuan, and the monthly cost of the second shift is 8000 yuan, and so on. We found that the manipulator Save materials, reduce costs, personnel take out time is uncertain, will cause product shrinkage, deformation (if the material pipe is too hot. Need to re-injection will waste materials). The manipulator is fixed at the moment of taking out, so the quality is stable. If the worker fails to take out the product successfully, the mold will be damaged when the mold is closed. If the truss manipulator fails to take out the product successfully, it will actively alarm and stop the machine.

02

2024

/

02

Truss manipulator and loading and unloading manipulator as high-tech products in the field.

Truss manipulator and loading and unloading manipulator as high-tech products in the field.

Truss manipulator and loading and unloading manipulator as products in the field of high-tech, truss manipulator can realize automatic machining production line in the practical application of the factory, instead of manual. Truss manipulator is widely used in rack and pinion, flange, pulley, flashlight, shaft, bearing and other industries. Some small workpieces with simple shapes and short processing beats are used to serve the automatic loading and unloading of the cutting unit by truss robots. Due to the adoption of this method, it is not necessary to arrange the parts in advance, but to sort the workpieces and select the workpiece state by means of a vibrating plate, and then to automatically load and unload the workpieces by a dedicated material channel or a manipulator driven by an oil cylinder or a cylinder. Vibration plate is a kind of automatic assembly or automatic processing machinery auxiliary feeding equipment, it can arrange all kinds of products in an orderly manner, cooperate with automatic assembly equipment to assemble all parts of the product into a complete product, or cooperate with automatic processing machinery to complete the processing of the workpiece. There is a pulse electromagnet under the vibrating plate hopper, which can make the hopper vibrate in the vertical direction, and the inclined spring plate drives the hopper to do torsional vibration around its vertical axis. The parts of the hopper rise along the spiral track due to this vibration. In the process of rising, after a series of track screening or attitude changes, the parts can automatically enter the assembly or processing position in a unified state according to the requirements of assembly or processing. The automated assembly line tells you that the purpose of its work is to automatically arrange the disordered workpieces in an orderly manner and transport them to the next process through vibration. Therefore, it can be configured as a mechanical parts cutting machine tool feeding robot feeding system.

02

2024

/

02

How to check the failure of truss robot?

How to check the failure of truss robot?

How to check the fault of truss robot? In general, the accessories of the machines produced by a truss robot manufacturer are also supplied by our factory, except for those purchased by some manufacturers in other places. When we purchase CNC lathe robot, one is to look at the credibility of the enterprise, but also to see whether the various accessories of this equipment can come from our factory, such as the controller that we truss robot may use, whether the performance of all parties can be fully utilized, assuming that a little is not suitable for the future application process will cause great risks. There are also several service lives of accessories. As for the problem of technical aging of accessories, there is still a big gap between the processing and production of some accessories in China and the products. We should increase the service life of accessories, prevent aging problems from being dealt with in time, and basically complete the big step of delaying the service life. Of course, the central accessories are selected as soon as possible. How to view the shortcomings of the truss robot problem? Intuitive view method This is the first method to repair, to check the truss robot circuit board components and lines can have burns, cracks and other phenomena, the circuit board can have short circuit, open circuit, chip poor contact and other phenomena. See if the truss robot's line is connected.

02

2024

/

02

< 12 >